Autel MaxiCharger AC Compact

• Delivers up to 22kW of power on three-phase power (7.4kW on single-phase power).
• Adaptive load management. A separate energy meter is installed on the building’s distribution board to measure electrical currents and send real-time data to the charging station. The charging stations can respond and increase or decrease the power provided to EVs. This prevents overloading your building’s distribution board, avoiding circuit breaker trips and reducing the need for costly electrical upgrades.
• Power sharing. Up to 7 MaxiCharger AC Compact units can be grouped together to share the available energy and assign charging priority to users who need it most. One unit will be assigned as the lead charger and will communicate to the others over a local area network.
• Compact design. The small housing of the charger (202 x 202 x 115 mm) allows for easy installation without requiring a large space. Mounting is suitable for a wall or on a separate pedestal.
• PV Hybrid mode. Multiple charging modes compatible with applications utilizing renewable (solar) electricity. These modes can allow the charger to only be utilized when there is surplus renewable electricity available or permits the charger to receive power from both the solar energy and the grid power.
• Several connectivity options. With a variety of connectivity options including Ethernet, Wi-Fi, and a SIM card for cellular communications this charger can be easily connected to a charge point management system or other chargers.
• A variety of access options can be set to either:
  • Free access enabling users to simply plug in and charge (suitable for free chargers or when chargers are in a secure garage)
  • Require an RFID tag to unlock the charger (suitable for locations where you want to restrict access)
• Customise your settings via the app. Access in-depth insights into your charging, set charging guidelines and power limits for smart, cost-efficient charging.
• High impact resistance. With an IK10 rating, the MaxiCharger Compact comes with the highest rated level of resistance to impact. Combined with an IP54 rating for water, dust, and debris, this charger is suitable for indoor or outdoor use.
• Charging cable lock. This socketed charger can be configured to permanently lock the charging cable so it can remain with the charger.

Features Eastron SDM 120CTM single phase energy meter/load guard

• Advanced multifunction energy monitoring for single phase systems with a nominal voltage of 230 VAC 

• Backlit LCD display for viewing of readings such as active energy (kWh), voltage (V), current (A), active power (W), frequency (F), and power factor (PF)

• Compact housing for easy installation. The DIN rail mounting energy meter can easily be installed in most distribution boards and only requires space for 1 module (18 mm width)

• Separate current transformer connection means there is no need to rewire an existing distribution board for current monitoring connections

• Modbus communications for dynamic load management are achieved by a twisted/shielded communications cable from the energy meter to the charger

Autel MaxiCharger AC Compact

• Type 2 socket (IEC 62196-2)
• Up to 22kW charging power on three-phase power (or up to 7.4kW on single-phase power)
• LED status indicators
• Device connectivity via WiFi, Bluetooth, Ethernet, Cellular Networks, RFID (NFC) reader, and RS485
• Inbuilt protection monitoring of overcurrent, overvoltage, undervoltage.
• Integrated surge protection
• Open Charge Point Protocol (OCPP) 1.6J communications
• Protection IP54 (ingress protection rating) and IK10 (impact rating)
• Dimensions: Width 202mm / Height 202mm / Depth 115m

Eastron SDM120 CTM Single Phase Energy Meter/Load Guard

• Input: Single phase (1PH-2W), 230VAC (Operational range of 80-120%), 1A/5A CT secondary, 50/60 Hz 

• Output: 2 pulse output + RS485 Modbus RTU 

• Multi-measurement: kWh, W, V, A, PF, Hz, etc. 

• Backlit LCD 

• Modbus transmission distance: 1000m 

• Dimensions: Width 17.5mm / Height 119mm / Depth 62mm 

Features Eastron ESCT-T24-100/5A current transformer

• Single phase split core current transformer 

• Input: 100A primary current 

• Output: 5A secondary current 

• 1m flying lead for connection to meter 

• 24mm aperture